Recent Repair Jobs-
Audio Pro 20121222 Repair
does not work from a distance, has to be right up to censer on speaker.
firmadoor GDO-4 Repair
remote will not power garage door red sensor does not light up anymore previously very unpredictable somtime would work after several attempts
Riviera UR203 Repair
Keeps cutting out and bleeping when trying to move the caravan.
Celebrity 5 pin dual Motor Repair
remote control is unresponsive the motor has been tested an has been found to be ok.
Hulsta 1.10-202 300J09R Repair
All buttons need to be checked as some do not work correctly or not at all.
The start up Buttons do not work
PSE RC03B P1345A 03Y265060 151519 Repair
CERTAIN BUTTONS NOT WORKING (YELLOW & GREEN)I DON'T USE BLUE BUTTON
Vibradorm Vrt/6-2- nl-uk Repair
Buttons aren't talking to the main box
Hitachi RC5117 Repair
Not sure just stopped working .changed batteties still not working.
Bose RCV1T-40 Repair
No remote function.
Vibradorm Bed Repair
Head and foot adjustment made by buttons on remote control. All UP controls OK, but Down control buttons have poor contact and have to be "waggled" to make them work. Red light shows when contact is made and bed adjusts as required. No problems with vibrators. I do not use them.
Vibredorm. Gmbh 2040046204 Repair
Does not connect to bed red light works on remote but does not connect to move bed
Art HCF1 6552020002 49/05 Repair
will not open the sofa recliner. bottom on the left side
Mertik Maxitrol G30 ZRRS (receiver) G30 ZRHSO (remote control) Repair
Using the two buttons to increase gas flow works perfectly, but the button to decrease gas flow often also increases the gas flow. It does eventually decrease the flow of gas after frequent attempts. I've noticed that the red light on the receiver does not always respond when the decrease gas flow button is pressed.
Brilliant Ledge, Trade Name 116 Repair
Right hand side lower button not working, Left hand side lower button temperamental
Mertik Maxitrol G30 Repair
Remote LED indicates the remote is sending a signal and the LED on the receiver briefly lights up indicating it is receiving the signal but the signal isn't maintained long enough or isn't strong enough to turn the fire on/off or up/down.
Naim Unitiqute Repair
Remote was dropped and now not working - on inspection it looks like battery connector on circuit board has broken,but I could be wrong!
Brilliant gas fire Repair
Inside the remote control, there is a bog standard replaceable battery that provides power to the remote control. The battery is connected to the remote control by two wires, a Red wire and a Black wire. The black wire has become detached. I believe this has resulted in the remote control no longer working as the fire works fine when switched on manually.
Copreci MMB22600 Repair
No contact or signal detected by the gas valve. Gas valve receiver has been checked by professional and seems OK. Professional told me he has 3 absolutely similar cases in this last year.
Helex G30-ZRRTT Repair
Reacts only at a small distance, and only down. Not the correct voltage at the output. Please test it for long distance with a closed door of the fireplace.
Verine Fire Repair
the black wire has become disconnected from the battery terminal plus the two left hand buttons do not work properly - they have to be pressed very hard to make them work.
Vibradorm Willowbrook Repair
Red light comes on OK lifts both top and bottom ,will not lower bottom half of bed.Nothing wrong with bed motor for second controller works each side of bed.So its this controller at fault.
mertik maxitrol G30-ZRRTT Repair
i think that the receiver doesn't respond to the remote control