Repair Work Carried Out At Remote Fixer
Glow worm climapro 2 Repair
Doesn’t come on we think it’s had something spilt on it
Mertik Maxitrol G30-ZRRTTB Repair
Fire turns on by itself. Taken batteries out of handset and fire still turns on. Thank you :)
Mertik Maxitrol Repair
The top button to raise the flame is not active. I have tested my parents remote as the have the same fire and all is fine. I tried my remote with their fire and it is the top raise flame button that will not work. It's definately an issue only with the remote.
Burley Repair
Remote not linking to fireplace, Cover comes off and button on top of remote is loose
Samsung AH59 -01644D Repair
Will not power on.. However when left next to a radiator to warm up, the remote then works perfectly for around 10 to 15 minutes. Thinking that it might be a dry joint, I re-soldered the main connections on the board, but this still did not fix the issue. Once warmed by soldering the joints, the remote worked again for around 10-15 minutes. I have still been able to use it by warming it next to or on top of the radiator but now wanting it to work permanently.
Magiglo G30 zrrs Repair
Battery terminals are corroded and two wires have come off the receiver remote is working fine but was asked to send it with the receiver.
Reich 527-0500 Repair
Only works when you take the remote apart and turn the PCB sideways on to to the uni. Loose internal connection ??
Mertik Maxitrol G30 ZRHSO Repair
Remote seems to be working - light comes on but receiver doesn't respond so gas fire electric motor won't operate. No lights on receiver when the remote is operated. Changed batteries on both remote and receiver.
Maxitrol B-82350 Repair
I dropped the remote and now it doesn’t work at all. I have replaced the battery but still doesn’t work.
Lexus 86170-50190 Repair
The battery spring contact plates have eroded/rusted - they’re very brittle and just crumble.
Enduro EM103 Repair
Handset is not working. Battery has been changed and still no LED light and not responsive with receiver.
Dimplex XB Series Repair
I seem to have a problem with a Dimplex fire remote control.
It has two buttons (marked 0 and 1) and has RC01-008 moulded onto it.
The fire will not turn on when using the remote - it will turn on manually. I cannot see any indication of a light from the remote LED when the either button is pressed
I have replaced the batteries
FLAMBEAU 335 Repair
Think it works but Grandkid separated double headed battery clip unit (lost) from main body!!!!! If possible, check for function before returned.
Mertik Maxitrol G30--ZRRS Repair
Gas fire turns on ok but will not turn off when pressing remote button. I changed all the batteries so that is not the problem.