Recent Repair Jobs-
Remote handset battery discharges in a couple of days
Powrtouch Mark 1 Repair
The remote does not connect to mover. Looks as though there is a diode thingy that has come away
Wurlitzer RCS-K 0059745 Repair
Not working at all. Working until recently.
Bose RC28T1-40 Repair
Gliderol 27 Mhz Repair
Been dropped a few times. Stopped working through this
Merton maxitrol G30-ZRHD Repair
Not worked after dropping remote on to floor. Remote display shows it seems to be working. But receiver not responding.
Battery left in remote leaked and wire has come loose, think part of battery connector is missing too.
Charlton and Jenrick Ltd Paragon 2000 Turbo Repair
Nothing happening, no lights despite new battery put in, no response from fire at all.
Mercik Mertik Maxitrol G30-Z RRs Repair
Only works to turn fire on will not turn down or off
Mertik Maxitrol (Magiglo branded) G30 ZRHS Repair
Remote operates correctly on command, most of the time. However it intermittently activates of its own accord, without user command, for about 1 second and "turns up" the fire slightly. Only way to stop the problem is to remove the remote battery after every desired command...
TRUMA 19296042/90909. SE Repair
LED LIGHT INTERMITTENT SWITCH STIFF.
Metric Maxitrol G30 ZRRS Repair
The receiver unit is not working, the LED light is not coming on. Replaced the batteries but it still won''t work. The LED is lighting up on the handset transmitter
Purple Line (e-go) Quattro Repair
remote emits tones etc but does not communicate with control box in van.(relays do not trigger). I have another Quattro remote which synchs and operates mover correctly. Have tried the matching procedure but no success.
Mirtik Maxitrol G 30 ZRRS Repair
The receiver box will only get a signal very close up and not at all when the unit is in place behind the gas fires metal cover.
Verine Fire Repair
The buttons have to be pressed in very, very hard to get them to operate the fire. Sometimes they will not work at all which is obviously a problem if the fire is on and then can't be switched off. I have of course tried new batteries in (which I know to work) and this doesn't help. There is something wrong with the remote itself
BOSE RCV1T-40 Repair
This remote control no longer works
Electric Fire TVs-01c Repair
Buttons only work after fiddling and pressing hard for min 10 mins
GROHE GRONTHERM WIRELESS 45441 Repair
NO LONGER OPERATES SHOWER BUT BARELY USED FLASHES SERVICE 01 CODE WHEN BATTERIES IN IT MAY NEED TO JIG BATTERIES AROUND FOR CONNECTION
mertik maxitrol g30 g30-zrhso AND g30-zrrs Repair
tx seems ok. it lights its led on flame up (both button held) & flame down ( where only one button needs to be held). however the rx lights its led on flame down & the gas valve closes; but the led does not light on flame up & the gas valve does not open. i tested with new batteries as a matter of course.
Mertik Maxitrol G30 - ZRHDO and G30 - ZRRTT Repair
The remote and the receiver no longer seem to be in contact. Sometimes there was a slight response but not sufficient to light the fire or drive the motor. I don't know how to describe it better.
Legend fires Repair
No buttons working. Even with brand new battery. Tried taking off battery connector and going straight to battery. No joy.
Foxpro TX9 Repair
I was caught in some heavy rain and my game call remote stopped working. I dried it out at home and it seemed OK, however next time I went to use it I couldnt power it up. Tried new battery etc.
No signal coming from the remote to the device
mertik maxitrol remote g30-zrhso-z26 and module g30-zrrs Repair
remote is showing red lights but does not seems to be connecting with gas fire module which is not showing any lights.
you guys have previously repaired this item, see: http://www.remotefixer.co.uk/rf1849.html
hopefully you can repair again. thanks cian