Recent Repair Jobs
not working at all changed batteries no luck it sounds like something loose inside
Marantz RC003PM Repair
I forgot to take the batteres out and they Leaked corroding the batterers terminals.so can no longer put batteres in remote.
truma mover m120988 Repair
the remote control will not switch on and before it 'lay down' completely it was increasingly flickering the green light !
Mertik Maxitrol G30 - ZRRS Repair
Receiver box not responding to signal from remote.
Verine Fire Repair
No buttons Function
No Response from remote (2nd of batch)
Vibradorm 00.103.240 Repair
Battery contact missing
MERTIK MAXITROL G30-ZRHSO Repair
ONE OF THE BATTERY TERMINALS HAS COME OFF
Wurlitzer 0059745 Repair
No buttons working ( power button, option button, reset button,and external channel 2,- and+ not supposed to work ) Have taken apart and cleaned , warmed gently with a haiirdryer and nursed back to life loads of times in the past but this time nothing Very occasionally, if I wiggle the cancel button , it will cancel.
HH INTERTECH Repair
No particular reason, just appeared to stop working. Removed battery cover to find negative black wire disconnected from circuit board, re connected it with new battery and nothing.
Tangent - Cinque 11188 Repair
Remote was working before being put into storage (because of a house move) now seems to be dead? Have fitted new batteries (recommended by manufacturer) CR2025 and CR2032 - neither work
Canton DM50 - failed completely Repair
The unit has failed completely. I've tried replacing the batteries and have also tried it with a different Canton DM50 soundbase to make sure it's the remote that's the problem and not the soundbase unit itself.