Recent Repair Jobs
Gazco G30 006321 DB Repair
Remote control not activating.
Truma se Repair
Green light not flashing with new batteries fitted
Panasonic IR6 Repair
some buttons not working particularly guide, video menu, back/return(do work intermittently)
Led flashes when batteries inserted but power button doesn't appear to work (doesn't connect to mover). Remote had been accidentally left in gas locker over winter and was slightly moist when retrieved
Button which allows you to increase or lower temperature is not working correctly. Upper button will not respond when pressed. believe might be stuck sellonoid? or something similar.
Volume buttons have to be pressed very hard to adjust volume but this only works intermittently now.
Purple Line Quattro Repair
I have taken our caravan to Caravan Solutions in Romsey who confirmed the Control Unit and Motor Mover itself are not at fault. The Remote Control light comes on and registers / bleeps with the Control Unit which displays a green light. However none of the buttons make the mover rollers work.
Not powering up
Carver CA 27 Repair
The on/off button does not always work when pressed down, you have to press down quite hard for it to work
Remote control won't work
Powakaddy Robokaddy Repair
Handset communicates with trolley, intermittently. I think there's a loose connection the handset because it drains the PP3 Battery very quickly. Sometimes the green light (which indicates communication with the trolley) stays on. Sometimes it doesn't come on. It's a bit baffling. My trolley is 10+ years old but still works well. I could use it manually but it seems a shame not to have the remote working. Please can you help.
Sony RM-SSD1 Repair
Intermittent fault on remote (no buttons working). IR signal is permanently on when not working.
MERTIK MAXITROL B6R-H8TL3B Repair
Powers up, screen broken I think, Not sure how its happened.
Blyss Caroline wall hung fire LDBL2000oa - DDSR Repair
The remote was left for a year without use with the batteries left inside. The negative end of one of the AA batteries has leaked destroying the negative silver wire spring terminal. The positive half of the terminal wire unit is OK but no longer linked to the negative side. The damage is restricted to the rear end of the remote's battery compartment. The terminals at the circuit board end of the unit are fine.
Pioneer AXD7483 Repair
dropped it, does not work now. Also: receiver button and I think volume button do not work well, maybe worn. Maybe some others too.
Truma se Repair
Hi Martin I spoke to you on the phone this morning regarding my remote
Will not switch on or off, (Remote unready opened up) PCB mount has top peg broken and red slide on/ off is not moving power switch. It has been difficult to switch on for a while & as a result it has worn the switch that is mounted on the PCB (so I think in probably needs a new on/ off switch..
panasonic n2qay8000428 Repair
volume control rocker does not operate in lower volume mode
Loss of connectivity with the fire. Tried changing battery but that did not work.
Mertek Maxitrol Repair
Works intermittently ; loose connection
Vibradorm bed Repair
Terminals inside the handset appear to have become fused to the bottom of the old battery(included). Result - nothing works.
purple line Repair
worked a month ago, put new battery in but no red light or sound know. completely dead.
truma m2 Repair
Working last week, NO green light have renewed batteries still no light.
Mertik Maxitrol G30-ZRHSO-Z26 9V DC / G30-ZRRS 6V DC Repair
Both only work to turn fire on and off if very close together about 50mm, light on remote goes on but light on receiver only works if remote very close, receiver starts to flash they eventually light stays on and works to turn the fire on and off, but will not work if any distance away
Whilst there is power to the unit as it beeps when i follow the rest procedure, the actual power button itself does not respond, and therefore i also don't know if the other buttons are working.