Recent Repair Jobs
Verine Orbis Repair
All buttons seem to be faulty and battery connection is broken. Case screw is missing.
The increase temperature button is worn and no longer works
battery getting hot, and remote not working
Sony RM-ANU032 Repair
No signal at all, no IR beam present
Mertik Maxitrol 014626 Repair
The button to activate and increase the height of the flame only works if immediately in front of the control box situated behind the fire facia
Down button, stopwatch button, reset, start and enter I know that do not work. There are a few buttons missing which is fine unless you can replace them. I cannot seem to find a replacement controller so need to get this one fixed.
Mertik maxitrol G30-ZRHSO Repair
The remote illuminates in one direction only and does not work the fire at all.
Not working at normal distance, only works in close proximity to receiver.
REPLACED BATTERYS BUT LIGHT DOES NOT LIGHT UP SO CONTROL IS DEAD
P & J Products 71106-800-101 Repair
The fireplace isn't working and the gas engineer thinks it's the remote that isn't working. The fireplace is a flambeau 335 basket fire - gas fire.
Truma Mover SE Repair
Battery contact spring has broken off. Other contacts may need replacement to prevent same occurring in the future.
Keyton MVRU FT-2 Repair
A few months ago the transmitter range shrank to a couple of centimetres but all the functions worked. Now there is no signal being transmitted.
Sun Brake Tester Repair
dead remote, no buttons work
Bose Lifestyle V30 RCV1T-40 Repair
Not sending radio signal to receiver. Replaced batteries but still not working.
Wurlitzer SMD 41-0150 Repair
No buttons work
Mertik Maxitrol G30- ZRHSO Repair
Remote appears to operate correctly receiver is not responding
SILENT GLISS 0450 Single Channel Wall Switch Repair
NO SIGNAL OUTPUT EVEN AFTER I HAVE CHANGED THE BATTERIES.
Simmons R2-T3. MG8 -R2-T Repair
both remotes not working at all , just not doing anything
MERTIK MAXITROL Repair
CONTROLLER WILL LIGHT THE FIRE, BUT THE BUTTON THAT SHUTS DOWN THE FIRE IS FAULTY
Intermittent signal. The light on the remote flashes then goes off. New batteries have been inserted but the problem is getting worse.
Valor fire model 840 Repair
Remote control is not working
2 off buttons missing battery cover missing, loose inside