Recent Repair Jobs
REMOTE WILL NOT POWER UP WITH RED ON/OFF BUTTON
bose rc35t-l Repair
None of the buttons appear to work and the battery cover is missing
Does not communicate with main unit and is very worn!
Paragon fire Repair
The buttons on the remote have stopped working and no longer igniting our Paragon gas fire. All batteries have been changed and still not working. The top left button is the one tjat has totally stopped working the other 3 are intermittent. Many thanks.
Mertik Maxitrol Repair
Remote handset fitted with new batteries only works when placed within 25 mm of receiver G30- ZRRS
Paragon Focus HE Brilliant Slab FirePlace Repair
The remote control doesn't seem to be working with the fireplace. We are having to switch the fireplace on manually. There is an amber light when you press the button to switch it on.
Yamaha RAV 180 V268670 Repair
The remote was not working properly. The transmit/learn light was flickering continually and the display on the DSP-A2 was cycling through as series of menus. The buttons were not having the appropriate effect on the machine but there was a reaction/pause in the menu cycling and the transmit/learn light on the remoter seemed to go on constant while the button was pressed.....the light no longer even flickers. Every thing dead on the remote. even the background key light does not work. Tried to clear the macros (not that I had created any) and then also tried the reset button in the battery compartment but no joy.
Mertik Maxitrol Repair
The unit controls our Magiglo gas fire. The ignite buttons should both be pressed to ignite the fire but appear to work by pressing the left-hand button its own. The red light seems to glow all the time with varying brightness. I have changed the battery but the fault still persists.
Appears completely dead. Transmit light does not illuminate pressing any button.
Bathroom Television Repair
Tv is not responding to the remote despite new battery
Flambeau EAB335NG Repair
Unable to light the fire buttons on left hand side do not connect with the fire - buttons on right hand side are working, but intermittently. Battery has always appeared to 'rattle about' within the remote unit.
Remote not working after a falling on floor.
Break in wires at the junction of the handset
Triton Luxury Body Dryer 2180514G Repair
Power on button not working, also the up temperature button
Alpine LandRover Repair
Was completely inoperable. basic investigation suggests acid damage to battery contacts.
Bose RC-9 Repair
+/- volume buttons not effective unless you stand close to unit, also speaker selection buttons the same you have to be close to unit. These faults are intermittent but have recently got much worse.
CCTV Dome Controller Repair
+- of the batteries have disconnected from the circuit board. I have attempted an home repair and hope I have not done too much damage
Mertik Maxitrol G30 ZRHSO Repair
The hand held part of the remote control works perfectly to turn the fire on. When turning it off it is ,at best, intermittent, and sometimes does not work at all. When it does not work the red light on the handset does not come on.
Honeywell DRU Repair
LCD screen was malfunctioning partially (randomly showing / not showing) at first and has now stopped showing anything at all. The remote was operational when partially working and probably still ok from a functional p-o-v. (This is hard to test without the display working).
Triton Airobe Repair
Aurora Victoria Electric Fireplace RCS-01c Repair
Fireplace does not turn on with remote now after changing batteries, before would turn on however only with great difficulty now on/off button does not work
Paragon Focus HE Repair
Only button that it is working is the “Stand By” button. Rest of them not working. Obviously tried new batteries with no success.
mertik maxitrol Repair
Does not work to start, control or end operation of the fire. Red lights do go on for starting, increasing and reducing flame but no indication that receiver is receiving. As this follows dropping of the remote on the floor I guess it is more likely to be the remote than the receiver. Do you service receivers also and should I send both?