Recent Repair Jobs
truma te Repair
Battery springs corroded
Enduro Quattro Repair
Buttons are really difficult to press - need to get a fingernail in 'just' the right place!
seip 94000714-R Repair
remote not working new battery fitted
Truma Mover S Repair
Remote control not working even with new batteries. I think there is a missing coil on one of the battery terminals.
No response from door opening motor ( spare set works as did this one )
Reich 527-0521 Repair
Turns on but no other buttons working
DEIK MT820 Repair
Non responsive remote. No light flicker or beeping to indicate it is pairing with the vac.
mertik maxitrol g30 zrrs Repair
Hi there this is faulty The down works fine the up button works only When you press the 3rd button
Remote light not coming on when pressing the buttons not sure if the buttons are working and not able to work the gas fire
Light not coming on loose black wire in side remote
Mertik Maxitrol G30 - ZRRS Repair
Receiver not responding
Tempur Pedic Repair
Metal where you put the battery has come out
Philips Sunmobile 4S (HB 871) Repair
The sunbed does not switch on and the manufacturer said that this happens when the remote is faulty. My electrician tested the PCB and the remote. The PCB is working fine but the remote is not working. He used a multimeter when the remote was attached to the sunbed and, although the PCB was fine, there was no electrical activity at the remote.
RECICH (MOVE CONTROL) Art.-No 527-0521 Repair
The button to put the mover into reverse is not working. It is the arrow button at the bottom of the 6 button control panel.
All other controls are working fine
paragon focus Repair
fire not igniting
Grohe 45441 Repair
Doesn't work at all
Both of the remotes are dead and non responsive
PDT KF04-433RC Repair
down button does not work
Marantz RC003SR Repair
Several of the buttons (e.g. volume) are working intermittently and only with a very firm push. New batteries had no effect.
The screen has been dim for a long time, which is less of a problem.
POWR PRODUCTS Repair
The remote was dropped and the chip dislodged and came out. The red light no longer comes on and the black wire is loose.
Vibradorm VIF-CD Repair
No longer operates bed
Will not switch on the TV
Wurlitzer SMD-41-0150 Repair
THE REMOTE DOES NOT FUNCTION IN ANY MODE. PREVIOUSLY IT WORKED ERRATICLY - IF BUTTONS PRESSED DOWN HARD - NOW NOT AT ALL
Reich 527-0521 Repair
You have to press the ‘on’ button twice to activate the control, but this has stopped working recently. It took a number of attempts before it worked the first time I used it after the winter, but now has stopped altogether, despite new batteries. However, it works - as do all the other buttons - when I use an aux lead to connect the control to the main box, though even doing that sometimes takes a few goes.