Recent Repair Jobs-
Marantz RC003PM Repair
I forgot to take the batteres out and they Leaked corroding the batterers terminals.so can no longer put batteres in remote.
truma mover m120988 Repair
the remote control will not switch on and before it 'lay down' completely it was increasingly flickering the green light !
Mertik Maxitrol G30 - ZRRS Repair
Receiver box not responding to signal from remote.
Verine Fire Repair
No buttons Function
No Response from remote (2nd of batch)
Vibradorm 00.103.240 Repair
Battery contact missing
MERTIK MAXITROL G30-ZRHSO Repair
ONE OF THE BATTERY TERMINALS HAS COME OFF
Wurlitzer 0059745 Repair
No buttons working ( power button, option button, reset button,and external channel 2,- and+ not supposed to work ) Have taken apart and cleaned , warmed gently with a haiirdryer and nursed back to life loads of times in the past but this time nothing Very occasionally, if I wiggle the cancel button , it will cancel.
HH INTERTECH Repair
No particular reason, just appeared to stop working. Removed battery cover to find negative black wire disconnected from circuit board, re connected it with new battery and nothing.
Tangent - Cinque 11188 Repair
Remote was working before being put into storage (because of a house move) now seems to be dead? Have fitted new batteries (recommended by manufacturer) CR2025 and CR2032 - neither work
Canton DM50 - failed completely Repair
The unit has failed completely. I've tried replacing the batteries and have also tried it with a different Canton DM50 soundbase to make sure it's the remote that's the problem and not the soundbase unit itself.
Mertik Maxitrol G30 Repair
The cable and battery connector needs replacing. The remote works ok.
Mertik maxi troll Repair
Smaller button to press when turning fire on is stuck down and therefore fire will not turn on
Mertik Fireplace Repair
wires to battery broken
Magiglo Fireplace Repair
The unit will switch on and increase the gas flow but won't turn down or off
Sun SBA 2000/2080 Repair
Remote stopped working. Buttons needed to maintain functionality are: The first 3 on the top row, buttons 1,2 and 4 on the second row.
Mertik Maxitrol G30-ZRHSO Transmitter and G30-ZRRS Receiver Repair
Remote will only flame down fire - not up. All red lights come on except when attempting to flame up.
A part is loose inside the remote.
Mertik maxitrol Handset and Receiver Repair
We can turn the fire off or down but not on or up The pilot light is all working. It's just the up switch on the remote
Pedicure chair Repair
Isn't powering on
Kinder Oasis RC Gas Repair
We have for years had difficulties in operating the buttons having to press harder or at different angles to get them to respond, particularly the round ones. But this winter we have found that all buttons do not operate apart from a very slight flicker from the indicator light.
The buttons stick and it doesn't seem to be communicating with the fire as the flames stay high or low whichever heat level it happens to be stuck on.
The battery contacts were damaged by leaking battery acid
Kenwood RC-V8500L Repair
Hadn't used the remote for some time as my CD player had quit. Replaced CD and tried to use the remote to control the amp, but unit didn't function. Renewed battery's and pressed the reset button inside battery compartment without success.